The diamond disc stone sawing machine is widely used because of its fast cutting speed, high efficiency and good quality of cutting board. In order to use the diamond disc stone sawing machine accurately, we still need to pay attention to some matters in practice, such as the following three common points:

According to our follow-up survey, most of the small stone processing plants have no definite sawing process at all, and the regular stone processing plants only have simple sawing process, and the implementation is not strict. Therefore, we think that when making sawing process according to stone material and plate specifications, stone processing plants should fully consider the accuracy of the equipment used, the quality of diamond knife head, the precision of saw blade matrix and the degree of re-welding, and then take into account the difficulty of cutting stone, and formulate a reasonable sawing process, and strictly implement it. Through the reasonable adjustment of the process, to make up for the shortcomings caused by saw blades and equipment, in order to achieve the purpose of improving the quality of plate materials. In daily management, we should strictly implement the mature cutting technology which has been proved feasible by long-term production practice. When quality problems occur in sheet metal, deep and careful investigation and analysis of cutting process and execution should be carried out first, and suggestions for improvement and preventive measures should be put forward, which can achieve twice the result with half the effort.

When deciding reasonable and feasible sawing technology such as linear cutting speed of saw blade according to stone material, special attention should be paid to the reasonable matching of transverse cutting speed and vertical feed cutting quantity of diamond disc stone sawing machine. Otherwise, not only production efficiency can not be improved, but also some negative effects will be brought, which will bring unnecessary losses to stone factory. For granite, because of its hard material, it is suitable for fast and shallow cutting. The lateral cutting speed is 1.5-3.2 m/min, and the vertical feed is 10-25 mn. For soft materials such as marble, it is easy to deep cutting and walking. The lateral cutting speed is 1.0-2.2 n positive min, and the vertical feed is 20-55 m durable.

In the selection of equipment, each stone factory must pay attention to the selection according to its own stone material and common plate specifications, and purchase high, medium and low gear equipment according to their respective economic strength and quality requirements. When purchasing, attention should be paid to explaining to the equipment supplier the different cutting speed (the degree of hardness and softness of stone material) required by common stone processing technology, so as to facilitate the manufacturer (supplier) to equip with appropriate side-speed mechanism (such as: equipped with several kinds of commonly used pulleys, or spindle box with speed change, speed-regulating motor, etc.), so as to facilitate the normal operation of later production and ensure the quality of products reasonably. Quantity and so on.