With the improvement of people's living standards, the material requirements are also high. Many people will polish the stone in their home decoration, so the brightness of the stone will be there. The stone polishing machine put the polished grinding stone on the processed products, and use the rapid operation of mechanical equipment and "dry polishing, wet polishing" to achieve the polishing effect. The product surface will have strong reflective light, which is commonly known as gloss. Then what is the principle of stone polishing machine, let's take a look at it.

The principle of polishing is mainly reflected in two aspects: the principle of particle grinding; the principle of physical chemistry.

1. Particle grinding: When the abrasive particles are coarsely ground to finely ground and polished, the traces of abrasive grinding on the surface of the stone from coarse to fine and then to the traces without the naked eye, the surface will be smooth, smooth and delicate, when the depth When it reaches 110 microns, the surface of the processed surface has a specular gloss, which is radiant and bright.

2. Physical chemical Principle: There are two polishing processes, namely "dry polishing and wet polishing". When the polishing millstone has a physical chemical effect between "dry and wet", dry polishing evaporates water on the surface of the stone, resulting in an increase in the concentration of the polished millstone, thus achieving the strengthening effect. The glossiness of the product begins to meet the ideal requirement, and the glossiness of the product reaches 85 degrees or more. Higher.

     Generally speaking, after finishing by the stone polishing machine, the gloss of the product is about 40-50, while some stone materials can not reach the above gloss after finishing, such as Shanxi black, black gold sand, Jining black, etc. The gloss of this kind of product after finishing is only between 20-30 degrees. It is not enough to explain with the principle of particle grinding before. This kind of product is polished "dry and wet". When the temperature rises and the temperature drops, the polishing is strengthened. In the process of polishing, physical and chemical reactions occur. The glossiness of the product is gradually improved after "dry polishing and wet polishing", and the glossiness is over 85 degrees.