Stone cutting machine is composed of cutting knife set, stone conveyor platform, positioning guide plate and frame. The stone cutting machine is made of iron suitable for dry cutting, wet cutting all kinds of stone, building materials, ceramic tiles, granite, marble, cement board, red brick, fireproof，bricks, etc.,are essential tools for home decoration.Stone cutting machine can cut stones in different depths, can process stones less than 1 m3, can turn waste into treasure, greatly save stone resources, but also conducive to the protection of the environment.

Pay attention to the following points when using the stone cutting machine:

1. Do not wear gloves. If dust is caused during operation, wear a mask or face mask.

2. Do not attempt to cut small workpieces that are not clamped.

3. This stone cutting machine only allows cutting profiles.

4. Do not perform strong sawing operation, and make the motor reach full speed before cutting.

5. No one is allowed to stand behind the saw.

6. Do not lean over or bypass the saw machine. Do not loosen any hand or lift the arm from the saw or workpiece when the saw blade is not stopped.

7. Do not operate the guard when it is not in place. Do not place your hand within 15 cm of the saw blade.

8. Always turn off the power before servicing or replacing the accessories, and wait for the saw blade to stop completely.