How To Solve The Problem Of Rust On The Spindle Of Stone Carving Machine?
Feb 16, 2019

Things used for a long time, inevitably there will be such a small problem, stone carving machine is no exception, with a long time, the spindle will rust, so how to solve this problem?

Compared with other carving materials, the hardness of stone is very high, and the requirement of carving machine is also very high. Since the requirements for machines are high, the performance of machines will be very high. The machine that can carve stone is called stone carving machine. It is well known that stone engraving machine has a very high application in engraving and can engrave many patterns. Our stone carving machine, with a very powerful carving library, provides customers with the most professional analysis of stone carving. Not only provide a large number of galleries, but also professional and technical personnel to provide the installation and commissioning of machines. It is our purpose to serve you at home and make you satisfied.

The progress of the times and the development of society. More and more sculpture manufacturers want to reduce the use of manpower and use more efficient machines. For this reason, CNC stone carving machine has attracted more and more people's attention.

The more attention you receive, the more users you will bring. The more users, the different working environment of stone carving machine.

三头石材雕刻机

After the stone carving machine is affected by the humid environment, its motor spindle will rust. Long time of rusting is not conducive to the maintenance of stone carving machine, which affects the use of stone carving machine and shortens the service life of the engraving machine.

Since the motor spindle rusting will appear such a problem, is there any way to solve the problem? The answer is yes, yes.

To provide you with two solutions:

First, physical methods of rust removal: by manual tapping, shoveling, scraping, brushing, sand or flexible brushing methods to eliminate surface rust scale, oxide skin, etc., this is a radical rust removal method of lacquer workers, can also use pointed hammer, wire brush, abrasive cloth, saw blade and other tools, but also the simplest method.

Second, chemical methods of rust removal: WD-40 can be used to clean the lubricant, spray evenly on the motor, you can use cotton cloth to erase the rust on the stone engraving machine, if the rust is severe, you can make several times. WD-40 is not conductive, and has a good lubrication effect.

Finally, remind us that after the machine is used, we must carefully check all aspects of the machine, find problems and solve them in time, and do a good job in the maintenance of stone carving machine. Only good maintenance of stone carving machine can make the machine have longer service life and more production.


Related News

24 hours at your service:

Scarlett@sambin.net

Contact Us

[[JS_BodyEnd]]