Column Hat Stone Profiling Machine

The column hat stone profiling machine mainly serves for antique buildings.The pillars used in the construction, cutting the stones at both ends, use the machinery produced by our company.Waiting for your inquiry.
 

Product introduction

The column hat stone profiling  machine mainly serves for antique buildings.The pillars used in the construction, cutting the stones at both ends, use the machinery produced by our company.The cylindrical cap copying machine manufactured by our factory can process the cylindrical surface and arc lines with complex patterns, and the processing accuracy is high. It can meet the processing requirements of high-quality cylindrical and arc lines.

Technical parameter

Structural characteristics

The column hat profiling machine uses pole head,dual wheel,dual fiber optic sensors.It is not only able to process the original column base,column caps ,curved lines cutting machine ,and can be a complex pattern of cylindrical surfaces and curved lines for processing .The processing high precision ,to meet the high-quality cylindrical and curved lines processing needs.

Points for Attention in Use of Pillar Cap Stone Cutting Machine

Wear work clothes and goggles before use. Workers with long hair need to be coiled up and wear a work cap.Turn on the main switch, try to turn a few laps without load, and confirm the safe start of column hat stone profiling machine.In the normal work of machinery, it is strictly forbidden to wear gloves to operate machinery.If dust occurs during operation, you can wear a mask or face mask.In the normal operation of the machine, it is forbidden to lean forward or stand behind the saw blade.Before repairing or replacing the mechanical saw blade, the power should be cut off and the operation can be carried out until the saw blade stops rotating.